Can't Connect To Filezilla

Username (e.g. epiz_XXX) or Website URL

username: epiz_30761430
website: datastats.ga

Error Message

Status: Connecting to 185.27.134.252:21…
Status: Connection attempt failed with ECONNREFUSED - Connection refused by server.
Error: Could not connect to server

Other Information

Everything is connected and active in terms of SSL, status, and whatnot… just can’t connect to Filezilla.

Help please?

Do you mind sharing the full logs from FileZilla?

2 Likes

you mean this?:

Status: Resolving address of datastats.ga
Status: Connecting to 185.27.134.252:21…
Status: Connection attempt failed with ECONNREFUSED - Connection refused by server.
Error: Could not connect to server
Status: Waiting to retry…
Status: Resolving address of datastats.ga
Status: Connecting to 185.27.134.252:21…
Status: Connection attempt failed with ECONNREFUSED - Connection refused by server.
Error: Could not connect to server

To use FTP, you must connect to ftpupload.net, not your personal domain.

2 Likes

did that too:

Status: Resolving address of datastats.ga
Status: Connecting to 185.27.134.252:21…
Status: Connection attempt failed with ECONNREFUSED - Connection refused by server.
Error: Could not connect to server
Status: Waiting to retry…
Status: Resolving address of datastats.ga
Status: Connecting to 185.27.134.252:21…
Status: Connection attempt failed with ECONNREFUSED - Connection refused by server.
Error: Could not connect to server
Status: Disconnected from server
Status: Resolving address of ftpupload.net
Status: Connecting to 209.148.189.22:21…
Status: Connection attempt failed with ECONNREFUSED - Connection refused by server.
Error: Could not connect to server
Status: Waiting to retry…
Status: Resolving address of ftpupload.net
Status: Connecting to 209.148.189.22:21…
Status: Connection attempt failed with ECONNREFUSED - Connection refused by server.
Error: Could not connect to server

Try “ftp.epizy.com

3 Likes

it worked… sort of… it says “unknown certificate”… “hostname does not match certificate”

Yes, one of the things with that URL is that it is not secure. Just ignore the warnings.

If you want the encryption, read the following guide:

1 Like

i received this message:

|Status:|Resolving address of ftp.epizy.com|
|Status:|Connecting to 185.27.134.11:21…|
|Status:|Connection established, waiting for welcome message…|
|Response:|220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------|
|Response:|220-You are user number 230 of 6900 allowed.|
|Response:|220-Local time is now 15:58. Server port: 21.|
|Response:|220-This is a private system - No anonymous login|
|Response:|220 You will be disconnected after 60 seconds of inactivity.|
|Command:|AUTH TLS|
|Response:|234 AUTH TLS OK.|
|Status:|Initializing TLS…|
|Trace:|TLS Handshake successful|
|Trace:|Protocol: TLS1.2, Key exchange: RSA, Cipher: AES-256-GCM, MAC: AEAD|
|Trace:|Hostname does not match certificate SANs|
|Error:|Remote certificate not trusted.|
|Error:|Critical error: Could not connect to server|
|Status:|Disconnected from server|
|Status:|Resolving address of ftp.epizy.com|
|Status:|Connecting to 185.27.134.11:21…|
|Status:|Connection established, waiting for welcome message…|
|Response:|220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------|
|Response:|220-You are user number 198 of 6900 allowed.|
|Response:|220-Local time is now 16:06. Server port: 21.|
|Response:|220-This is a private system - No anonymous login|
|Response:|220 You will be disconnected after 60 seconds of inactivity.|
|Command:|AUTH TLS|
|Response:|234 AUTH TLS OK.|
|Status:|Initializing TLS…|
|Trace:|TLS Handshake successful|
|Trace:|Protocol: TLS1.2, Key exchange: RSA, Cipher: AES-256-GCM, MAC: AEAD|
|Trace:|Hostname does not match certificate SANs|
|Status:|TLS connection established.|
|Command:|USER epiz_30761430|
|Response:|331 User epiz_30761430 OK. Password required|
|Command:|PASS **|
|Response:|230-Your bandwidth usage is restricted|
|Response:|230 OK. Current restricted directory is /|
|Command:|SYST|
|Response:|215 UNIX Type: L8|
|Command:|FEAT|
|Response:|211-Extensions supported:|
|Response:| EPRT|
|Response:| IDLE|
|Response:| MDTM|
|Response:| SIZE|
|Response:| REST STREAM|
|Response:| MLST type
;size
;sizd
;modify
;UNIX.mode
;UNIX.uid
;UNIX.gid
;unique
;|
|Response:| MLSD|
|Response:| AUTH TLS|
|Response:| PBSZ|
|Response:| PROT|
|Response:| UTF8|
|Response:| ESTA|
|Response:| PASV|
|Response:| EPSV|
|Response:| SPSV|
|Response:| ESTP|
|Response:|211 End.|
|Command:|OPTS UTF8 ON|
|Response:|200 OK, UTF-8 enabled|
|Command:|PBSZ 0|
|Response:|200 PBSZ=0|
|Command:|PROT P|
|Response:|200 Data protection level set to private|
|Status:|Logged in|
|Trace:|Measured latency of 216 ms|
|Status:|Retrieving directory listing…|
|Command:|PWD|
|Response:|257 / is your current location|
|Command:|TYPE I|
|Response:|200 TYPE is now 8-bit binary|
|Command:|PASV|
|Response:|227 Entering Passive Mode (185,27,134,11,63,41)|
|Trace:|Binding data connection source IP to control connection source IP 10.100.114.61|
|Trace:|Trying to resume existing TLS session.|
|Command:|MLSD|
|Error:|Connection timed out after 20 seconds of inactivity|
|Error:|Failed to retrieve directory listing|
|Status:|Disconnected from server|
|Status:|Resolving address of ftp.epizy.com|
|Status:|Connecting to 185.27.134.11:21…|
|Status:|Connection established, waiting for welcome message…|
|Response:|220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------|
|Response:|220-You are user number 184 of 6900 allowed.|
|Response:|220-Local time is now 16:07. Server port: 21.|
|Response:|220-This is a private system - No anonymous login|
|Response:|220 You will be disconnected after 60 seconds of inactivity.|
|Command:|AUTH TLS|
|Response:|234 AUTH TLS OK.|
|Status:|Initializing TLS…|
|Trace:|TLS Handshake successful|
|Trace:|Protocol: TLS1.2, Key exchange: RSA, Cipher: AES-256-GCM, MAC: AEAD|
|Trace:|Hostname does not match certificate SANs|
|Status:|TLS connection established.|
|Command:|USER epiz_30761430|
|Response:|331 User epiz_30761430 OK. Password required|
|Command:|PASS **********|
|Response:|230-Your bandwidth usage is restricted|
|Response:|230 OK. Current restricted directory is /|
|Command:|OPTS UTF8 ON|
|Response:|200 OK, UTF-8 enabled|
|Command:|PBSZ 0|
|Response:|200 PBSZ=0|
|Command:|PROT P|
|Response:|200 Data protection level set to private|
|Status:|Logged in|
|Trace:|Measured latency of 218 ms|
|Status:|Retrieving directory listing…|
|Command:|PWD|
|Response:|257 / is your current location|
|Command:|TYPE I|
|Response:|200 TYPE is now 8-bit binary|
|Command:|PASV|
|Response:|227 Entering Passive Mode (185,27,134,11,109,68)|
|Trace:|Binding data connection source IP to control connection source IP 10.100.114.61|
|Trace:|Trying to resume existing TLS session.|
|Command:|MLSD|
|Error:|Connection timed out after 20 seconds of inactivity|
|Error:|Failed to retrieve directory listing|

yeah, so when i click ‘quickconnect’ it says i’m already connected to a server, but where the files should be on the right, it says it’s not connected to any server…

nvm… i think i got it to work.

thank you so much for all your help!

stay safe out there!

happy new year!

3 Likes

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.